Hauppauge MediaMVP MVP-1000 Digital Media Receiver

[francoisl]

R500

Email: francois@pactsa.org.za



This Hauppauge MediaMVP MVP-1000 Digital Media Receiver lets you play MP3 and WMA music, JPEG and GIF digital pictures and MPEG and DIVX videos on your PC. The MediaMVP connects to your LAN (Local Area Network) via its built-in Ethernet connection or allows for direct connection to your PC using an Ethernet Crossover cable!

View your slide shows and play music at the same time. Connect the MediaMVP to your home theater system for the ultimate media entertainment! Included is a remote controller, so you can pause, fast forward and rewind through videos, adjust the audio volume, plus pause music and picture shows!

Setup is easy! Simply install the software, connect the MediaMVP to your PC or router's RJ-45 port and have instant access to digital music, videos and pictures! Stream multimedia content to your TV today with the Hauppauge MediaMVP MVP-1000 Digital Media Receiver!

Features/Specifications:
Hauppauge MediaMVP MVP-1000 Digital Media Receiver


General Features:
Watch and listen to PC based music, videos or pictures on your TV
Linux based digital media receiver
Play slide shows with music
Connect to Ethernet (wired) networks
Plays MP3, WMA and playlists (M3U, B4S, PLS and ASX playlists)
Play MPEG-1, MPEG-2, and DIVX videos on your PC
View JPEG and GIF digital pictures
Plays DVD quality videos on your TV set over an Ethernet LAN
Remote control allows for easy navigation
Connect MediaMVP to home theater system for the ultimate media entertainment
Create MPEG videos on your PC with any Hauppauge WinTV or WinTV-PVR, and play them on your TV set
Perfect for traveling with your notebook PC so you can watch videos, pictures and listen to music on the road


MediaMVP Video Decoder Specification:
Dedicated hardware decode support for MPEG-2 Transport Stream, MPEG-2 MPML and MPEG-1
Decodes full CCIR601 resolution NTSC and PAL encoded MPEG-2 bit streams in real time, up to and including 720 x 480 (NTSC) or 720 x 576 (PAL)


MediaMVP Audio Decoder Specification:
Dedicated hardware decode support for MPEG-1 level 2 or level 3 audio (MP3 audio)
Decodes MP3 audio with datarates up to 320 Kbits/sec, variable or fixed
Decodes mono and stereo. Mono audio sent to both left and right channels


Hardware Audio Decoder Specifications:
MPEG-1 level 2 (MP3) or level 3 (PCM audio not supported at this time)
Decodes MPEG datarates from 1.5 Mbits/sec to 8 Mbits/sec


Connections:
IR (Infrared)
Power
10/100 Mbps LAN (RJ-45 connection)
Audio L/R
S-Video
Video out


Unit Dimensions:
1.5 x 6.5 x 5.5-inches (H x W x D, approximate)


Regulatory Approvals:
FCC
CE

Package Includes:
Hauppauge MediaMVP MVP-1000 Digital Media Receiver
Quick Installation Guide
Installation CD-ROM
AV cable
Cat5e Ethernet cable
Remote control w/Two AAA batteries
AC adapter (100-240V, 47/63Hz)
Stand

Additional Information:


Notes:
Retail Package may show some wear, may not be suitable for display
Model: MVP-1000
UPC: 7 85428 01000 7
For direct connection to PC or notebook, you'll need a Ethernet Crossover Cable (not included)


Product Requirements:
PC Requirements:
Pentium 750 MHz or faster
Pentium 4 1.8 GHz or faster to play DivX movies
Microsoft Windows XP/2000
128 MB RAM
20 GB free hard disk space
TV with audio/video jacks
CD-ROM drive
Available power outlet


Network Requirements:
One (1) 10/100 RJ-45 port on a Router, Hub or Switch
or
Direct connect from MediaMVP to PC via Ethernet Crossover Cable (not included)